#GET PS3 4.81 OUT OF DEMONSTRATION MODE UPDATE#

I followed all the instructions here exactly but I'm getting a 'No applicable update found' error. the firmware file name is already named for you, put in folder structure like this, The PS3UPDAT.PUP is the firmware file 'PS3/UPDATE/PS3UPDAT.PUP'' Now just wait and follow the steps once it in down preparing and boots into system Updater, after it says installing and not to turn off the system you're pretty much set, when its down it will reboot and boot into your new Retail firmware. Now click System Update and make sure your flash drive is plugged into the ps3, now click start and select at the same time, it will check for the firmware. Step 3: Hold down the power button again but this time the system will beep once, then shortly after it will beep 3 times fast when it does this release your finger off the power button, Look on the screen it will say Hook the controller up with USB, do this then you will have a men of options, this is the recovery menu this is used alot by people who are techical with the system and to fix problems also Firmware updates. I'll provide link at the end of this post, One thing to think about, Updating through the XMB(System menu main screen) Does work but in this case it may not detect the firmware, If the XMB system update does not recognize it turn off the system and do the following to put the system into Recovery mode to update. '.i'll just provide you with my already patched firmware so you and everyone else on Demo firmware doesn't have to do the technical work to create it. I don't know if the firmware in this link will work, but the link is good as of today. (However, I did just notice that his link is dead. Here is what Joey posted back in May 2012. I can use all features and update firmware like it was any other PS3 you buy in the store. I did what Joesy suggested back when he posted it and I have had no problems using my PS3 normally. After you have the good firmware installed you can then do a system update to the current firmware (if you want to). Follow the directions posted by Joey Johnson. I do not believe it matters what firmware you currently have.

#GET PS3 4.81 OUT OF DEMONSTRATION MODE PATCH#

the firmware file name is already named for you, put in folder structure like this, The PS3UPDAT.PUP is the firmware file 'PS3/UPDATE/PS3UPDAT.PUP' Link for pre patch 4.11 retail firmware constructed by me. Step 2: Hold down the power button untill the system turns off again and the light is red Shop consoles are the same as retail console just different firmware.ДЄnd mllc97 i'll just provide you with my already patched firmware so you and everyone else on Demo firmware doesn't have to do the technical work to create it. Put in the ps3 and go to system update and check via storage media. after its done properally eject your usb from your pc. then remove the string flag that says promotion-to-retail make it blank keep patch promo flag and update flag checked. in the mfw builder go to patch firmware for installing shop/promo unit at the bottom of the list. then inside update folder drop the update file. open up the program target the original firmware to 4.11 retail and the modified to your flash drive with the folders lined up like this PS3/UPDATE/PS3UPDAT.PUP if you do not comprehend what this means Ps3 is a folder on root of usb. Get PS3 MFW builder, then go get 4.11 Retail firmware off sonys website. You add promo_flags.txt with a value of 0 and change Update_flags.txt to 0300 on the root of the firmware after unpacked then repack it.

Get ps3 4.81 out of demonstration mode